MILDTL28803/1E
QUALIFICATION:
Extent of qualification: See table XIV.
TABLE XIV. Extent of qualification.
Number of samples
Dash letters
Tests
Qualifies
required
GA
4
Complete in accordance with
qualification inspection
GB
4 1/
All
of MILDTL28803 2/
PF
4
1/
2 sample units for the group II (qualification and group B) tests of MILDTL28803,
1 sample unit for group III (qualification and group B) tests, and 1 sample unit for group
IV (qualification and group B) tests.
2/
When applicable, immersion seal test shall be performed in lieu of dripproof seal test.
Part or Identifying Numbers (PIN): The PIN shall consist of the letter "M" followed by the basic number of the
specification sheet, and a coded two digit dash letters indicating the number, type, and arrangement of the modules,
and type of circuitry and seal, as specified. See example below:
M28803/1
B
A
Military designator and
specification sheet number
Single code indicating number,
type, and arrangement of
modules, as specified (see table XII)
Single code indicating seal and
type of circuitry, as specified
(see table XIII)
PIN for crimp style terminals (see figure 3) (package of 25 terminals): M22885/8050.
PIN for connector block (see figure 4): M28803/1ZZ.
Reference documents. In addition to MILDTL28803, this document references the following:
MILSTD810
MILC22520/1
17
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business