MIL-DTL-28803 Display, Optoelectronic, Segmented Readouts, Backlighted, General Specification ForThis specification covers the general requirements for displays, optoelectronic, segmented readouts, backlighted through optical filters.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

The documentation and process conversion

INCH-POUND

measures necessary to comply with this revision

MIL�DTL�28803C

shall be completed by 3 March 2014.

3 September 2013

SUPERSEDING

MIL�DTL�28803B

15 January 2003

DETAIL SPECIFICATION

DISPLAY, OPTOELECTRONIC, SEGMENTED READOUTS, BACKLIGHTED,

GENERAL SPECIFICATION FOR

This specification is approved for use by all Departments

and Agencies of the Department of Defense.

1. SCOPE

1.1 Scope. This specification covers the general requirements for displays, optoelectronic, segmented readouts,

backlighted through optical filters.

1.2 Classification. Displays shall be of the following styles and types as specified (see 3.1, 6.2 and 6.4). Displays

covered by this specification shall be of the following styles as specified (see 3.1).

Style I: Light source, incandescent lamps.

Style II: Light source, light emitting diodes.

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This

section does not include documents cited in other sections of this specification or recommended for additional

information or as examples. While every effort has been made to ensure the completeness of this list, document

users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this

specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a

part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are

those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL�A�8625

�

Anodic Coatings for Aluminum and Aluminum Alloys.

MIL�DTL�28786

�

Switches, Electrical and Fiber Optic, Packaging of.

Comments, suggestions, or questions on this document should be addressed to DLA Land and Maritime,

ATTN: VAC, P.O. Box 3990, Columbus, OH 43218�3990, or emailed to Semiconductor@dla.mil. Since contact

information can change, you may want to verify the currency of this address information using the ASSIST Online

AMSC N/A

FSC 5980